Product search:

Portable Hardness Tester HLM-100 Plus

Home
Product
Service
Distributor
About Us
Contact

Welcome to
Digiwork
Get better
Instruments

Thickness TestersThickness PartsHardness TestersHardness PartsFlaw DetectorsRoughness TestersRoughness PartsDigital Multimeters

Call 905-669-1663

 

Home > Products > Hardness Tester >

Portable Hardness Tester with Mini Printer - HLM-100 Plus

Unit Price: US $1599.00

HLM-100 Plus - Fully Equipped Digital Leeb's Hardness Tester

HLM-100 plus hand-held digital hardness tester features high measuring accuracy, reliability and durability, wide measurable hardness ranges, ease of operation, and portability (light weight and small dimensions). HLM-100 plus comes with a powerful built-in microprocessor, a convenient mini-printer, and a RS-232C communication port (all are standard features). This hardness tester has been widely used in a long array of industrial sectors.

  • Convenient hardness measurements at difficult-to-access locations or in confined spaces such as the inner wall surface of a die or mould;
  • Determination of hardness variations over a large surface area;
  • Hardness testing on heavy and large work pieces or on permanently installed parts or machines whose hardness cannot be measured by using a traditional hardness tester;
  • In-line hardness measurements essentially in real time during the manufacturing process.

Highlighted Features:

Automatic conversion between different hardness scales:

Correlations between HL values and other standard hardness Values (Brinell, Vickers, Rockwell and Shore) have been established for 9 most commonly used materials. Conversions between different scales can be readily accomplished.

Measurements can be made from several different directions:

This feature makes it convenient to conduct hardness measurements on a large part or within a confined space.

The measuring accuracy may be compromised if erroneous data with an abnormally large deviation are accepted.

The instrument provides a manual error-correcting deleting function during batch test situations.

High batch testing efficiency:

For a batch test that involves testing a large number of similar parts, the expected range of hardness values can be pre-set based on different requirements for improved testing efficiency. Upper or lower hardness limits can be pre-set for material sorting.

Data printing functions:

Data acquired may be printed out immediately or stored and printed at a later time.

RS-232C Communication port:

Transfer data to a PC for further data reduction and processing.

Automatic power-off:

When the tester remains idle for 4 minutes (no measurement made and no key-pad pressing operation) or when battery power is below a critical level, tester power will be automatically switched off.

Auto Re-set:

During power-up and power-down, the tester is capable of automatic re-setting.

LCD backlit by advance Electro-Luminescence (EL) technology:

Liquid crystal display with back-illuminating capability.

Intelligent battery recharge management.

Pre-Loaded Material Codes:

Steel, Cast steel, Alloy Tool Steel, Grey Cast Iron, Nodular Cast Iron, Aluminium Alloys, Brass, Bronze, Copper alloys

Strength testing Conversion for steel and cast steel.

Technical Specifications:

  • Measuring Accuracy: relative error +/-0.8% (750-800LD)
  • Measuring ranges:
    • LD 200 -900
    • HB 30 -655
    • HRC 20- 68
    • HRB 20- 101.
    • HV 80 -940
    • HSD 32.5- 99.5

  • Equivalent tensile strength σb 500-1923N/mm2 (for reference only)
  • Working temperature: 0 C ~ 45C
  • Relative humidity < 90% RH
  • Power: 4 Ni-MH batteries (1.2 Volts x 4).
  • Battery re-charge time: approximately 3 hours
  • Automatic power-off: when idle for 4 minutes
  • RS-232C communication port: transfers data to a PC for further processing (e.g., for SPC), display and printing.
  • Mini-printer: may print out data immediately after measurement or at a later time.
  • Print paper: Ф30mm x 44mm
  • Dimensions: 224mm x 84mm x 38mm
  • Tester weight: 0.7kg (excluding the impact probe)

Standard Delivery:

    1. Main Tester Unit with Built-In Mini-Printer
    2. Impact Device (Type D)
    3. Standard Test Block (D Type)
    4. Small Supporting Ring (D6a)
    5. RS-232C Communication Cable and Software Disk (Floppy)
    6. 8 Rolls Printer Paper
    7. AC Adapter (110 - 220V)
    8. Operation Manual
    9. Cleaning Brush
    10. Carrying Case

Picture


© 2016 Digiwork Instruments, All Rights Reserved.